| Contents
Description and operation
Purpose
Specifications
Tractor composition
Design and operation
Measuring instruments, tools and accessories
Marking and sealing
Packaging
Construction and operation of tractor components
Controls and instrumentation
Engine
Clutch clutch
Gearbox
Hydrostatic swing mechanism
Brakes
Cardan transmission
Rear axle
Final transfer
Power take-off shaft
Frame and chassis
Hinged system
Cabin air conditioning and heating system
Air conditioning controls
Air conditioner operation
Heating system
Electrical equipment
Fuses
Intended use
General requirements
Operating limitations
Preparing the tractor for use
Safety measures when preparing the tractor
Preparing the engine for start
Using the tractor
Starting the engine
Starting the engine at low temperatures
Starting off and driving the tractor
Tractor turns
Stopping the tractor
Stopping the engine
Running in
Tractor towing
PTO use
Tractor rear hitch control
Trailer hitch
How to replace rods and screws on the rear linkage
Safety requirements for tractor operation
Fire safety requirements
Maintenance
Tractor maintenance
General instructions
List of fuels and lubricants
Maintenance after running-in
Safety requirements during maintenance
Scheduled maintenance
Seasonal maintenance (CO)
Maintenance of tractor components
Changing the oil in the crankcase
Replacing the paper filter element (BPE) of the oil filter
Flushing the coarse fuel filter
Cleaning the rotors of engine and gearbox centrifugal oil filters
Draining sediment from the fine fuel filter
Checking and adjusting engine valve clearances
Checking the tightening of the cylinder head bolts
How to remove air from the fuel system
Air cleaner service
Turbocharger flushing
Fuel equipment check
Adjusting the oil pressure in the engine lubrication system
Generator test
Replacing the filter element Regotmas 635-1-19 or EFOM 605-10-19 of the pressure filter of the gearbox control system
Adjusting the clutch control
Setting the clearance between the piston and the cylinder piston pusher
Adjusting the free stroke of the cut
Filling and bleeding the hydraulic system with brake fluid
Checking the gearbox oil level
Rear axle oil level check
Flushing the gearbox hydraulic strainer
Replacement of the filter element 0009830615V of the swing hydraulic system
Transmission centrifuge relief valve adjustment
Replacement of the filter element "Regotmas 635-1-19" of oil tanks of the hydraulic system and hydraulic system of rotation
Checking the tightness of the pneumatic system
Checking the status of the brakes
Hydraulic oil change
Replacing the filter elements of the fine fuel filter
Changing the GSP oil
Lubrication of rear linkage and towbar slewing shaft bushings
Gearbox oil change
Replacing the oil in the rear axle gear
Diagnostics of malfunctions of the electronic-hydraulic control system of the "BOSCH" attachment device
How to check and adjust the axial clearance of the bearings of the track rollers
The procedure for checking and adjusting the axial clearance in the bearings of the idler wheels
Maintenance and testing of batteries
Adjusting road headlights
Track mounting and dismounting
Track tensioning procedure
Air conditioning and refrigeration service
Replacing the filter element (Regotmas 605-1-19) of the pressure filter of the hydraulic system
List of possible faults and instructions for their elimination
Storage rules
General provisions
Inter-shift storage rules
Short-term storage rules
Long-term storage rules
Transportation
Change registration sheet |
Copyright (c) 2008 disc.allsave.info.