![]() |
Content
Engine list
Service work
Information about flexible or fixed service
Service tables
General information
General warnings for working on high-voltage system
Raising vehicle with lifting platform or trolley jack
Entries in service schedule
Severe operating conditions
Vehicle data sticker
Connecting vehicle diagnostic tester
Vehicle identification number
Countries with hot climate
Country overview for diesel not compliant with EN 590
Country overview for petrol not compliant with EN 228
Engine code and engine number
Countries with high levels of dust
Type plate
Shortened intervals for spark plug replacement
Descriptions of work
Swivel joints and suspension link mountings: inspecting
All-wheel drive coupling: changing oil
Automatic headlight control and static cornering light: checking function
Automatic gearbox 09S: changing ATF
Battery (12V): checking battery terminal clamps for secure seating
12-volt battery: renewing
Battery (12V): checking with battery tester (always refer to workshop manual)
Status of battery (12V): reading - sending diagnosis protocol via online connection
Front passenger front airbag: checking key switch and “ON/OFF function”
Tyres: checking condition, wear pattern, tyre pressure and tread depth
Brake and clutch system: Change brake fluid
Brake system and shock absorbers: inspecting for leaks and damage
Brake fluid level: Check
Brakes, front and rear: checking thickness of brake pads and condition of brake discs
Diesel fuel filter: draining
Diesel fuel filter: renewing
Diesel particulate filter: checking
Dual clutch gearbox 0DD: changing gear oil
Dual clutch gearbox 0GC: changing gear oil
Electric windows: checking positioning (open and close functions)
Fault memory of all systems: reading with vehicle diagnostic tester, correcting possible faults according to repair guidelines
Natural gas system: resetting interval display if a check in line with ECE ruling 110 has been carried out
Natural gas system: visually inspecting natural gas tank for corrosion and leakage
Natural gas system: checking wax layer between natural gas fuel tank and fuel tank shutoff valve
Natural gas tank: renewing
Natural gas filler connection and sealing cap: checking condition, if necessary cleaning and checking seal
Boots: inspecting
High-voltage battery: checking charge level
Maintenance of high-voltage battery
High-voltage battery: charging
Hybrid components: inspect for damage to high-voltage components and wires
Interior and exterior body: inspecting for corrosion with doors and flaps open
Poly V-belt: renewing
Poly V-belt: checking condition
Poly V-belt and tensioning roller for belt-driven starter-alternator: renew
Poly V-belt and tensioning roller for belt-driven starter-alternator: check
Cooling system: checking frost protection and coolant level
Cooling system for high-voltage system: checking coolant additive and coolant level
Air filter: cleaning housing and renewing filter element
Multi-purpose additive for diesel fuel: adding
Multi-purpose additive for petrol fuel: adding
Engine and components in engine compartment: inspecting for leaks and damage (from above and below)
Engine cover panel “top”: removing and installing
Engine data plate with Certification Test Group code: checking if fitted and for condition, also checking CTG code against the code in the engine control unit
Engine compartment cover (noise insulation) “bottom”: removing and installing
Engine oil level: checking
Engine oil: Draining, renewing oil filter and filling engine oil
Engine oil: capacities and specifications
Panoramic sliding sunroof
Panorama sliding roof with rear panorama roof
Road test: performing (driving behaviour, noises, air conditioner etc.)
Wheel securing bolts: tightening to specified torque
Reducing agent (AdBlue®/DEF): replenishing
Reducing agent (AdBlue®/DEF): changing
Tyre Pressure Loss Indicator: calibrating
Tyre repair set: Checking
Window wash/wipe system: functional check
Headlight adjustment: checking LED headlights
Headlight adjustment: checking matrix LED headlights
Headlight adjustment: checking fog lights
Service interval display: resetting
Service interval display: recoding
Track rods: checking clearance, attachment and boots
Dust and pollen filter: cleaning housing and renewing filter element
Selective wheel torque control: change oil in left and right clutch chambers
Transportation mode: switching off
Transportation devices: removing blocking pieces
Clock and date: setting
Underbody: inspecting for damage to underbody sealant, underbody panels, routing of lines, plugs
Front differential lock: changing oil
Warning stickers, Golf GTE: checking
Toothed belt (petrol engines): renewing
Camshaft drive toothed belt (diesel engines): renewing
Spark plugs: Renew
Exhaust emissions test
Exhaust emissions test for petrol engines
Exhaust emissions test for diesel engines
Periodic Technical Inspection (PTI)
Glossary
Change history |

Автор: Монолит
Год издания: