|
Content
Description and operation of the tractor
Purpose of the tractor
Specifications
Tractor composition
Vibration level at the workplace of the tractor operator "BELARUS-80X / 80X.1 / 100X"
Tractor marking
Packaging
Controls and devices
Arrangement of tractor controls and instruments
Instrument panel switches and switches
Rocker switch block and rear wiper switch
Cab heater-fan control
Instrument cluster
Control lamp block
Tachospeedometer
General information
Tachospeedometer AR70.3813
Indicator combined KD 8083
Steering
General information
Steering wheel adjustments
Parking brake control
Engine shut-off handle, battery switch
Manual fuel control knob, engine cooling shutter control
Tractor pedals
Switching ranges, gears and stages of the reduction gearbox
General information
Shifting ranges and gearboxes
Reducer control
Tractor speed diagram
Power take-off control
General information
Rear PTO control
Side semi-independent PTO shaft control
Side synchronous shaft power take-off control
Hydraulic linkage control
General information
HLL pump control
External hydraulic cylinders and RLL control
Control of the RLL fixing mechanism in the transport position
Electrical fuses
Cab locks and handles
Cab door locks
Opening a side window
Opening the rear window
Cab roof opening
Seat and seat adjustments
General information
Seat adjustments "BELARUS"
Grammer seat adjustments
Pneumatic compressor control
Electrical connection elements
Socket for connecting electrical equipment of aggregated agricultural equipment
Fuel tank valve control
Description and operation of tractor components
Engine and its systems
Engine
General information
Engine components
Engine air cleaning system
Engine air cleaning system on tractors "BELARUS-80X / 80X.1"
Engine air purification system on tractor "BELARUS-100X"
Outer part of the engine cooling system
The outer part of the cooling system of the D-243 (D-243S) engine on the BELARUS-80X / 80X.1 tractors
The outer part of the cooling system of the D-245 (D-245S) engine on the BELARUS-100X tractor
Clutch
Clutch clutch
Features of dismantling, installation and adjustment of the clutch
General information
Removing the clutch
Installing the clutch
Adjusting the clutch release levers
Clutch control
General information
Clutch pedal free play
Clutch housing
Transmission
General information
Mechanical transmission unit
KP Management
KP work
Rear axle
General information
Main gear
Differential and differential lock
End transfers
Onboard gearboxes
Rear PTO
General information
Adjusting the gap in the PTO band brakes
External adjustment of brake bands
Rear PTO control
Side semi-independent PTO
Side synchronous PTO
Brakes
Service brakes and service brake control
Adjusting the service brake control
Parking brake
Parking brake control adjustment
Pneumatic system
General information
Single-line pneumatic drive of tractors "BELARUS-80X.1 / 100X"
Operation of a single-wire pneumatic drive of tractors "BELARUS-80X.1 / 100X"
Checking and adjusting the brake valve drive of the pneumatic system of tractors "BELARUS-80X.1 / 100X"
Pneumatic system of tractors "BELARUS-80X"
Checking and adjusting the pneumatic system pressure regulator
Front one-wheel axle 50X-3030010 of tractors "BELARUS-80X / 100X"
General information
Adjusting the axial clearance in the front single-wheel axle bearings
Front two-wheel axle 50X-3030100 of tractors "BELARUS-80X.1"
Tractor chassis and wheels
Hydrostatic steering
General information
Metering pump
Swing mechanism with hydraulic cylinders
Swing mechanism
Adjusting the clearance between the rack and the slewing mechanism shaft
Hydraulic linkage system
Rear hitch
General information
Screed
Brace
Top link
Adjustable implement lift limiter
Attaching implements to a tractor
Towing hitch TSU-1ZH
General information
Setting the cross member and the rear ends of the lower links into working position
Electrical equipment
General information
Electric torch preheater operation
Tachospeedometer programming procedure
Tachospeedometer control panel
The procedure for programming the electric tachospeedometer AP70.3813
The order of programming the indicator of the combined KD8083
Installation and adjustment of speed sensors
Cab
General information
Installing and dismantling the cab
Exterior mirrors
Installation of a travel extension
Marking of tractor components
Using the tractor as directed
Safety measures when preparing the tractor for work
Using the tractor
Getting into the tractor
Preparing to start and starting the engine
General instructions
Preparation for starting and starting the engine under normal conditions (plus 4 ° C and above)
Preparation for starting and starting the engine at low temperatures (plus 4 ° C and below)
Starting the tractor movement, shifting the gearbox
Stopping the tractor
Stopping the engine
Getting off the tractor
PTO use
Selection of the optimal internal tire pressure depending on the working conditions and the load on the tractor axles, the rules for using tires
Selection of the optimal internal tire pressure depending on the working conditions and the load on the tractor axles
Tire rules
Tire inflation
Setting the rear wheel track to a width of 2400 mm
Operation of tractors with a front two-wheel axle
General information
Installation of the front two-wheel axle on the tractor "BELARUS-100X" instead of the front one-wheel axle
Formation of front wheel track on tractors with two-wheel axle
Safety measures when operating the tractor
General safety measures when operating the tractor
Fire safety measures
Reassembly and running-in of the tractor
Reassembling the tractor
Maintenance before tractor break-in
Tractor running-in
Maintenance during tractor break-in
Maintenance after tractor break-in
Action in extreme conditions
Aggregation
General information
Types of agricultural machines aggregated with tractors "BELARUS-80X / 80X.1 / 100X"
Rear hitch three-point device
Towing hitch
Features of the use of the hydraulic system of the tractor to drive the working bodies and other elements of the aggregated hydraulic machines and units
Using safety clutches when using PTO and cardan shafts
Features of using PTO and cardan shafts
Methods for changing the traction-coupling properties and cross-country ability of the tractor
General information
Methods for changing the traction-coupling properties and cross-country ability of the tractor
Using the mounted quick-release ballast
Pouring water (solution) into the tires of the rear wheels to increase the grip
How to fill tires with water or aqueous solution
The procedure for partial discharge of water or aqueous solution from the tires of the wheels
The procedure for completely draining water or aqueous solution from the tires of the wheels
Selecting the inflation pressure
Rear axle differential lock application
Features of using the tractor in special conditions
Tractor operation in areas of fields with uneven terrain. Possibility of using a tractor when laying silage
Application of substances for chemical processing
Working in the forest
Determination of total mass, front and rear axle loads, tire bearing capacity and required minimum ballast
Possibility to install a front loader
Maintenance
General instructions
Providing access to tractor components for maintenance
Maintenance procedure
Scheduled maintenance operations
Shift Maintenance (ETO) every 8 - 10 hours of operation or every shift
Maintenance every 125 hours of operation
Maintenance every 250 hours of operation
Maintenance every 500 hours of operation
Maintenance every 1000 hours of operation
Maintenance every 2000 operating hours
General maintenance
Seasonal maintenance
Safety measures during maintenance and repair
General safety requirements
Precautions to avoid hazards from batteries and fuel tank
Rules for the safe use of jacks and indication of places for their installation
Refueling and lubrication of the tractor with fuel and lubricants
Possible malfunctions and instructions for their elimination
Possible engine faults and instructions for their elimination
Possible clutch faults and instructions for their elimination
Possible transmission faults and instructions for their elimination
Possible rear axle malfunctions and instructions for their elimination
Possible malfunctions of the rear PTO shaft and instructions for their elimination
Possible brake malfunctions and instructions for their elimination
Possible malfunctions of the pneumatic system and instructions for their elimination
Possible malfunctions of hydrostatic steering and instructions for their elimination
Possible malfunctions of the hydraulic linkage system and instructions for their elimination
Possible malfunctions of electrical equipment and instructions for their elimination
Possible malfunctions of the air ventilation and cab heating system and instructions for their elimination
Tractor storage
General instructions
Requirements for inter-shift storage of cars
Requirements for short-term storage of machines
Requirements for long-term storage of machines in open areas
Preservation
De-preservation and re-preservation
Preparing the tractor for operation after long-term storage
Safety requirements for conservation
Tractor transportation and towing
Tractor transportation
Tractor towing
Disposal of the tractor
Service Bulletins
Appendix A (mandatory) - Wiring diagram of electrical equipment of tractors "BELARUS-80X / 80X.1 / 100X" |
Translation Techniques. English - Russian. Практические основы перевода
Автор: Т. А. Казакова
Год издания:
