Скачать книгу - Electrical Installation Designs

Более 350 кельтских орнаментов в виде схем для вышивки крестом (и других счетных техник рукоделия). Книга просто уникальная для всех любителей кельтского орнамента и любителей рукоделия. Уровень предложенных орнаментов - от простейших "косичек" до сложных "ковровых" рисунков. Короткий пояснительный текст на английском относится, главным образом, к технике вышивки. Все схемы даны в ч/б варианте, клетка очень мелкая но хорошо различимая.

Rizzoni is designed for the sophomore/junior level, Introduction to Electrical Engineering course required for non-EE majors. The most widely used book for this course, Rizzoni introduces non-majors to the three basic areas of electrical engineering: circuits, electronics, and electromechanics. The second edition continues the tradition of focusing on the topics and issues of interest to the non-electrical engineering student. To maintain student interest in these topics, Rizzoni provides numerous links between electrical engineering and other engineering fields.

Content

Introduction

The theory of the emergence and spread of noise in the car

Methods for noise control in the vehicle

Review of materials used in sound insulation

Installation diagram noise insulation coating

Examples of sound insulation installation

Application

Content

Introduction

• Is it worth to install gas-cylinder equipment (GBO)
• The difference between propane and methane

General information

• Propane-butane
• Chemical composition of propane-butane mixture
• Octane number
• Detonation in the engine
• Compression ratio
• Compression
• TDC
• Ignition timing

Classification of GBO The composition of the GBO

• Second generation GBO injection kit
• Injection kit of 3rd generation GBO
• Injection kit of the 4th generation GBO

Gas reducer

• The device and operation of the gas reducer
• on an example of an electronic reducer Tomasetto AT-07

Adjustment of the 2nd and 3rd generation GBO reducer

• 1st stage - power adjustment (only for GBO 2nd generation)
• 2nd stage - adjustment of the XX

Gas engine operation

• What happens in the cylinder
• Why combustion is disrupted
• What happens when the engine is running on gas
• Ensuring the efficiency of the catalyst
• Maintenance of the coordination of a signal of a lambda-probe (oxygen gauge) at work on gas with gasoline
• electronic engine control unit (ECU)

What burns in the engine?

• Risk of fire of a car

Other issues

• Advantages of GBO
• What are the bottles
• Gas consumption relative to gasoline. Dynamics on gas
• Does the presence of GBO to work on gasoline
• Getting Started on cold weather
• How often to change the air filter when driving on gas
• GBO and spark plugs

A little general about the systems of the 4th generation GBO

• The gas injection system "Favorit"
• Gas injector

About manufacturers

• Standard layout of the 2nd generation GBO installation
• Installation
• Scheme of installation of third generation GBS
• Scheme of installation of the 4th Generation GBO
• Variants of the arrangement of equipment of different cars (photo)
• Safety measures for maintenance and operation of GBO

Manuals for tuning gas systems of the IV generation

• Instruction to the Dream XXI system of sequential gas injection
• Connection and programming instructions for the Digitronic-DGI controller
• Instructions for configuring Diego controllers (AKME)
• Connection and programming instructions for the ZENIT controller
• Installation and operation of LOV ECO 1
• Installation and operation of LOV ECO 2
• Gisn Software user's guide
• Preliminary stage
• Agis gas injection controller software documentation
• Advanced settings

Content

Introduction

• Should I put GBO (gas cylinder equipment)
• The difference between propane and methane

General information

• Propane-butane
• Chemical composition of propane-butane mixture
• Terms

Classification of GBO

• First generation of GBOs
• The second generation of GBO
• The third generation of GBO
• The fourth generation of GBO
• The fifth generation of GBO

The composition of the GBO

• Injection kit GBO 2-nd generation:
• Injection kit of 3rd generation GBO:
• Injection kit of the 4th generation GBO:

Gas reducer

• The device and operation of the gas reducer
• on an example of an electronic reducer Tomasetto AT-07

Adjustment of the 2nd and 3rd generation GBO reducer

• 1st stage - power adjustment (only for GBO 2nd generation)
• 2nd stage - adjustment of the XX

Gas engine operation

• What happens in the cylinder
• Why combustion is disrupted
• What happens when the engine is running on gas
• Ensuring the efficiency of the catalyst
• Maintenance of the coordination of a signal of a lambda-probe (oxygen gauge) at work on gas with gasoline
• electronic engine control unit (ECU)

What's burning in the engine

• The question: "What burns in the engine?"
• Risk of fire of a car

Other issues

• Advantages of GBO
• What are the bottles
• Gas consumption relative to gasoline. Dynamics on gas
• Does the presence of GBO to work on gasoline
• Getting started in cold weather
• How often to change the air filter when driving on gas
• GBO and spark plugs

Slightly in common with the 4th generation GBO systems

• The gas injection system "Favorit"
• Gas Injector

About manufacturers

• Standard layout of the 2nd generation GBO installation
• Scheme of installation of third generation GBS
• Scheme of installation of the 4th Generation GBO
• Safety measures for maintenance and operation of GBO